Smart Tips For Uncovering

How to Find Hidden Piping and Valves

If you are a homeowner then you need to know the details of your home like the back of your hand. One of the things that is especially critical is finding hidden water as well as gas piping and valves and it is important to know where they are especially if you have to deal with things like an emergency. Below are some of the ways that you can be able to find out where the various valves are located.

If your home has natural gas then the shutoff valves will probably be located just before the gas meter outside the home. For the most part, most of the nubs are usually rectangular in shape and are opened using a wrench but most gas companies usually recommend that you do not touch them. There is however a side valve that is usually located where the gas pipe first enters or much further down the line.

Modern homes usually have gas pipes that are made from a flexible copper pipe and the pipe runs from outside the house into your utility room. If you find such a piping in your home then you are sure that you have a really high pressure gas system. The shutoff valves of such systems are usually located near the water heater or the furnace.

There is a high chance that water valves usually have two shut off valves since one is located before the meter and the other located after the meter. Should you be in an environment where it gets really cold then the shut off points is most likely to be located inside the home to prevent things like freezing. For milder climates, you are most likely to find out that the valves are located in an underground lid or box next to exterior.

In case you are finding it hard to locate the water shut off valve then it is important for you to look at the property report that was given to you during the last phase of the property purchase. It is important to look keenly at the report since it will show you where the valve is located. There is also a high probability that the picture of what the valve looks like will be drawn so that you are able to know what it looks like.

With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. Since such valves usually have metals then you can easily find them by using a metal detector. It is easy for you to be able to know more info. about where to start when you have a plan even though it may not point out the exact location of the valve.

Resource: you can try these out